Asus GigaX2024SX - Manual (Page 296)

the no form to restore the default setting.
[n ctor | partner} admin-key
key dmin key is used to identify a specific link aggregation
group (LAG) during local LACP setup on this switch. (Range: 0-65535)
Defau
0
erface Configuration (Port Channel)
y allowed to join the same LAG if (1) the LACP system priority
, (2) the LACP port admin key matches, and (3) the LACP port channel
• If the port channel admin key (lacp admin key - Port Channel) is not set when
a channel group is formed (i.e., it has the null value of 0), this key is set to the
same value as the port admin key (lacp admin key - Ethernet Interface) used
by the interfaces that joined the group. Note that when the LAG is no longer
used, the port channel admin key is reset to 0.
Example
Syntax
lacp {actor | partner} admin-key key
o] lacp {a
- The port channel a
lt Setting
Command Mode
Int
Command Usage
• Ports are onl
matches
key matches (if configured).
4-128