Asus GigaX2024SX - Manual (Page 71)

• If a port is disabled (shut down) due to a security violation, it must be manually
nd Attributes
Action – Indicates the action to be taken when a port security violation is
ult.)
NMP trap message and disable the port.
disables port security on the port. (Default:
isabled)
– Trunk number if port is a member (page 3-69 and 3-70).
– Click Security, Port Security. Mark the checkbox in the Status column to
enable security for a addresses allowed
n a port, and click Apply.
re-enabled from the Port/Port Configuration page (page 3-64).
Comma
• Port – Port number.
• Name – Descriptive text (page 4-137).
•
detected:
- None: No action should be taken. (This is the defa
- Trap: Send an SNMP trap message.
- Shutdown: Disable the port.
- Trap and Shutdown: Send an S
• Security Status – Enables or
D
• Max MAC Count – The maximum number of MAC addresses that can be
learned on a port. (Range: 0 - 1024)
• Trunk
Web
port, set the maximum number of MAC
o
Figure 3-28. Configuring Port Security
CLI – This example selects the target port, sets the port security action to send a
trap and disable the port and sets the maximum MAC addresses allowed on the
port, and then enables port security for the port.
3-46