Asus GigaX2024SX - Manual (Page 196)

Syntax
username name {access-level level | nopassword |
password {0 | 7} password}
no username name
• name - The name of the user.
(Maximum length: 8 characters, case sensitive. Maximum users: 16)
• access-level level - Specifies the user level.
Exec, 15: Privileged Exec.
ngth: 8 characters plain text, 32 encrypted, case sensitive)
The device has two predefined privilege levels:
0: Normal
• nopassword - No password is required for this user to log in.
• {0 | 7} - 0 means plain password, 7 means encrypted password.
• password password - The authentication password for the user.
(Maximum le
Default Setting
• The default access level is Normal Exec.
• The factory defaults for the user names and passwords are:
Command Mode
Global Co
Command
nfiguration
text or encrypted) when reading the configuration file during
ple
Usage
The encrypted password is required for compatibility with legacy password
settings (i.e., plain
system bootup or when downloading the configuration file from a TFTP server.
There is no need for you to manually configure encrypted passwords.
Exam
enable password
After initially logging onto the system, you should set the Privileged Exec
ntrols acce
form to reset
no enable password [level level]
• level level - Level 15 for Privileged Exec. (Levels 0-14 are not used.)
• {0 | 7} - 0 means plain password, 7 means encrypted password.
• password - password for this privilege level.
(Maximum length: 8 characters plain text, 32 encrypted, case sensitive)
Default Setting
• The default is level 15.
password. Remember to record it in a safe place. This command co
to the Privileged Exec level from the Normal Exec level. Use the no ss
the default password.
Syntax
enable password [level level] {0 | 7} password
4-28