Link aggregation commands, Link aggregation commands -123 – Asus GigaX2024SX User Manual
Page 291
• For Fast Ethernet interfaces, the rate limit granularity is 512 Kbps, 1 Mbps, or
rate limit granularity is 33.3 Mbps.
Example
3.3 Mbps.
• For Gigabit Ethernet interfaces, the
Link Aggregation Commands
Ports can be statically grouped into an aggregate link (i.e., trunk) to increase the
bandwidth of a network connection or to ensure fault recovery. Or you can use the
Link Aggregation Control Protocol (LACP) to automatically negotiate a trunk link
between this switch and another network device. For static trunks, the switches
haveto comply with the Cisco EtherChannel standard. For dynamic trunks, the
switches have to comply with LACP. This switch supports up to six trunks. For
example, atrunk consisting of two 1000 Mbps ports can support an aggregate
bandwidth of 4 Gbps when operating at full duplex.
4-123