Asus GigaX2024SX - Manual (Page 274)

• link-up-down - Keyword to issue link-up or link-down traps.
The link-up-down trap can only be enabled/disabled via the CLI.
d link-up-down traps.
snmp-server enable traps command, no notifications
led by this command are sent. In order to configure this device to send
notifications, you must enter at least one snmp-server enable traps
and
h a
pe related to that keyword is enabled.
with the
rder to send notifications,
command.
E
Default Setting
n an Issue authenticatio
and Mode Comm
Global Configuration
Command Usage
• If you do not enter an
control
SNMP
command. If you enter the command with no keywords, both authentication
enabled. If you enter the command wit link-up-down notifications are
eyword, only the notification ty k
• The snmp-server enable traps command is used in conjunction
ost command to specify snmp-server host command. Use the snmp-server h
o which host or hosts receive SNMP notifications. In
rver host you must configure at least one snmp-se
xample
Related Commands
p-server host (4-141) snm
4-106