Asus GigaX2024SX User Manual
Page 156
Advertising
Web – Click Priority, IP DSCP Priority. Select the required interface, select an
rom the DSCP table, enter a value in the Class of Service Value field, then
entry f
click Apply.
Figure 3-78. Mapping IP DSCP Priority Values
CLI – The following example globally enables DSCP Priority service on the switch,
1 (on port 1), and then displays the DSCP
Priority settings.
maps DSCP value 0 to CoS value
Note:Mapping specific values for IP DSCP
configuration command, but any changes will apply to t
is implemented as an interface
he all interfaces on the
switch.
3-131
Advertising