Asus GigaX2024SX - Manual (Page 256)

before re-transmitting EAP packet (page 4-115).
- supplicant-timeout – Supplicant timeout.
- server-timeout – Server timeout.
- reauth-max – Maximum number of reauthentication attempts.
- max-req – Maximum number of times a port will retransmit an EAP
request/identity packet to the client before it times out the authentication session
(page 4-110).
- Status – Authorization status (authorized or not).
- Operation Mode – Shows if single or multiple hosts (clients) can connect to an
802.1X-authorized port.
- Max Count – The maximum number of hosts allowed to access this port (page
4-112).
- Port-control – Shows the dot1x mode on a port as auto, force-authorized, or
force-unauthorized (page 4-111).
- Supplicant – MAC address of authorized client.
- Current Identifier – The integer (0-255) used by the Authenticator to identify the
current authentication session.
• Authenticator State Machine
- State – Current state (including initialize, disconnected, connecting,
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
- Reauth Count – Number of times connecting state is re-entered.
• Backend State Machine
- State – Current state (including request, response, success, fail, timeout, idle,
initialize).
- Request Count – Number of EAP Request packets sent to the Supplicant
without receiving a response.
- Identifier(Server) – Identifier carried in the most recent EAP Success, Failure or
Request packet received from the Authentication Server.
• Reauthentication State Machine
- State – Current state (including initialize, reauthenticate).
4-88