Asus GigaX2024SX - Manual (Page 148)

Figure 3-72. Port Priority Configuration
signs a default priority of 5 to port 3. CLI – This example as
Mapping CoS Values to Egress Queues
This switch processes Class of Service (CoS) priority tagged traffic by using four
R s are defined in IEEE
ed according to recommendations in
andard as shown in the following table.
priority queues for each port, with service schedules based on strict or Weighted
ound Robin (WRR). Up to eight separate traffic prioritie
80
the IEEE 802.1p 2.1p. The default priority levels are assign
st
3-123