Asus GigaX2024SX - Manual (Page 106)

interfaces.
Command Usage
• For Fast Ethernet interfaces, the rate limit granularity is 512 Kbps, 1 Mbps, or
3.3 Mbps
• For Gigabit Ethernet interfaces, the rate limit granularity is 33.3 Mbps.
Web – Click Port, Rate Limit, Granularity. Select the required rate limit granularity
for Fast Ethernet and Gigabit Ethernet, and click apply.
Figure 3-50 Rate Limit Granularity Configuration
net
CLI - This example sets and displays Fast Ethernet and Gigabit Ether
granularity.
Rate Limit Configuration
Use the rate limit configuration pages to apply rate limiting.
Command Usage
• Input and output rate limit can be enabled or disabled for individual interfaces.
• Rate Limit Status – Enables or disables the rate limit. (Default: Disabled)
•
e Rate Limit Level, and click Apply.
Command Attribute
• Port/Trunk – Displays the port number.
Rate Limit Level – Sets the rate limit level. (Range: 1-30: Default: 30)
Note: Actual rate limit = Rate Limit Level * Granularity
Web – Click Rate Limit, Input/Output Port/Trunk Configuration. Enable the Rate
Limit Status for the required interfaces, set th
3-81