Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 106)

Teledyne LeCroy Trigger and Filter Settings in Easy Mode
104 SierraNet M168 User Manual
Enter the values for the Ether header, IP Header and the count of the expected number of
occurrences. Check the Check All box to select ports P1 through P8 or individually select
ports.
Other Internet Protocol patterns available are:
 IP Frame (ICMP)
 IP Frame (IGMP)
 IP Frame (IPV6)
 IP Frame (OSPF)
 IP Frame (AH)
 IP Frame (ESP)
 IP Frame (PIM)
 IP Frame (UDP)
 IP Frame (TCP)
2.6.12 iSCSI Pattern
Initiator PDU
Double‐click iSCSI Data‐Out to open the dialog.
Figure 2.69: iSCSI Data-Out Dialog
Enter the values for the Ether header, IP Header and the count of the expected number of
occurrences. Check the Check All box to select ports P1 through P8 or individually select
ports.
Other ISCSI patterns available are:
 iSCSI Login Request