Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 25
SierraNet M168 User Manual
23
Launching Your Analyzer
Teledyne LeCroy
Figure 1.13: Device Management Dialog
Set Alias Name
Address Alias allows you to assign a meaningful name to each address to assist in
interpreting the results displayed in the trace view. To assign address names in an open
trace view, select Setup > All Connected Devices > Set Device Alias Name (see
Figure 1.14 on page 23
.)
Figure 1.14: Assign Alias Name
Assign a meaningful name to each address in use and click OK. The assigned names
replace the address in the trace view, Search, filter,. and Statistical Report.
If you elect to save the captured trace file, the assigned address names are saved together
with the result, so that when you open the trace file later, the assigned names are
retained.
Set As Default
If you want to set these address aliases for trace files that will be captured later, you can
set them as default, and new traces will be opened by these default address aliases.
Connect/Disconnect
Click Connect to connect or click Disconnect to disconnect a device.