Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 86
Advertising
Teledyne LeCroy
Trigger and Filter Settings in Easy Mode
84
SierraNet M168 User Manual
Figure 2.59: Symbol Pattern Dialog
Enter the values for the Sync Header, Order Set and the count of the expected number of
occurrences. Check the Check All box to select ports P1 through P8 or individually select
ports.
Two different order sets can exist in one 64 bits payload of a 66 bits block. The six
examples of a remote and local fault given below demonstrate how to manually enter
ordered set triggers.
0x0100000001000055 ‐> local fault‐local fault
0x000000000100004b ‐> local fault‐idle
0x010000000000002D ‐> idle‐local fault
0x0200000002000055 ‐> remote fault‐remote fault
0x000000000200004b ‐> remote fault‐idle
0x020000000000002D ‐> idle‐remote fault
Advertising