Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 225
Advertising
SierraNet M168 Protocol Analyzer User Manual
223
Scenario Example
Teledyne LeCroy
Figure 4.19: Adding an Event for Sequence 1
2. Click OK to close the 6‐Byte Any SCSI Command dialog box.
3. After adding an Event, to add an Action in the Sequence 1 panel, drag and drop
Monitor/Count.
The Monitor/Count dialog box displays (see
Figure 4.20 on page 223
).
Figure 4.20: Adding Action Monitor/Count for Sequence 1
4. Click the OK button to close the Monitor/Count dialog box.
5. Repeat step 4 to add another Action (if desired).
The completed Scenario is shown in
Advertising