Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 120)

Teledyne LeCroy Trigger and Filter Settings in Easy Mode
118 SierraNet M168 User Manual
Basic Link Service
Double‐click Basic Link Service to open the Basic Link Service Pattern dialog.
For any FC pattern, double‐click the pattern name, for example, double‐click Basic Link
Service to open the Basic Link Service Pattern dialog.
Note: Some screen captures for the FC patterns are similar to the screen capture shown below.
Figure 2.81: Basic Link Service Pattern Dialog
Enter the values for the Frame Header, CS_CTL, F_CTL and the count of the expected
number of occurrences. Check the Check All box to select ports P1 through P4 or
individually select ports.
Note: Some patterns have additional options to select from drop‐drown lists as shown in the figure
above.