Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 37)

SierraNet M168 User Manual 35
Chapter 2
Protocol Analysis
The system performs Protocol Analysis by defining and running an analysis project. This is
saved in a file with the .get extension. An analysis project definition defines what to
capture, what the analyzer triggers on, and the memory settings. You can save defined
projects as project *.gep files for later use.
After you install the Analyzer software (see “Software Installation” on page 14 ) and set up
the Analyzer (see “Hardware Setup” on page 14 ), launch the Analyzer software (see
“Launching Your Analyzer” on page 21 ) to display the main window.
Figure 2.1: Teledyne LeCroy Ethernet Protocol Suite Main Window