4 device management – Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 24
Advertising
Teledyne LeCroy
Launching Your Analyzer
22
SierraNet M168 User Manual
Click OK to connect to the device.
Figure 1.11: Add Device to Project Dialog
Note:
Click Refresh Device List to display all the devices on the on the local Ethernet subnet and also
devices connected via USB cable
1.5.4
Device Management
Click on Setup and select Device Management to open the Device Management dialog
(see
Figure 1.13 on page 23
).
Figure 1.12: Connecting to Device(s)
Advertising