Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 39)

SierraNet M168 User Manual 37
Opening an Existing Project Teledyne LeCroy
The New Project main window opens with default settings to capture Everything on the
bus and to Trigger On on Snapshot. (The analyzer captures everything immediately
without triggering on anything in particular.)
Figure 2.4: Main Window
2.2 Opening an Existing Project
To open an existing project, click File > Open from the Analyzer Menu Bar to open an
existing .gep project, or click on the Hide Menubar icon and select File > Open.
2.3 Software Menus and Toolbar
The menu toolbar options are given in the following table.
Open icon. Click to open a file. See “File” on page 39 .
Open icon. Click to open a file. See “File” on page 39 .
Save icon. Click to save a file. See “File” on page 39 .
Preferences icon. Click to save a file. See “Preferences” on
page 41 .
Spreadsheet View icon. See “Spreadsheet View” on page 148 .
Frame Inspector View icon. See “Frame Inspector View” on
page 157 .
Traffic Summary icon. See “Traffic Summary View” on page 44.