Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 214)

Teledyne LeCroy InFusion Scenarios
212 SierraNet M168 Protocol Analyzer User Manual
 Symbol Detector(each has its own Embedded counter) X 4
 Auto‐Neg Detector X 4
 Counter X 12
 Frame Detector X 8
 Timer X 8
 Frame Jammer X 8
 Symbol Substitute X 16
 Aut‐Neg Jammer X 4
 Capture DWORD slot X 8
 Insert/Save frame slot (up to 16K bytes) X 7
 Insert BYTEs/Symbols inside frame (up to 128 bytes) X 8
 Global Action Register X 8
 State per sequencer X 256
 Action Register per state X 8
Usage of Action Register:
 Each Counter in Global Rules = 1
 Each Counter in State = 1
 Each Timer in Global Rules = 2
 Each Timer in State = 3
 Other Actions = 1
The list of available resources for Fibre Channel is given below:
 Symbol Detector (each has its own Embedded counter) X 4
 Ordered‐set Detector (each has its own Embedded counter) X 8
 Pattern (32bit) Detector (each has its own Embedded counter) X 12
 Training Sequence Detector X 4
 Counter X 12
 Frame Detector X 8
 Timer X 8
 Frame Jammer X 8
 Symbol Substitute X 4
 Pattern/Orderded‐set Substitute X 12 (shared with Pattern detectors)
 Training Sequence Jammer X 4
 Capture DWORD slot X 8
 Insert frame slot (up to 4K bytes) X 1
 Insert DWORD inside frame (up to 64 bytes) X 8
 Global Action Register X 8
 State per sequencer X 256
 Action Register per state X 8
Usage of Action Register:
 Each Counter in Global Rules = 2
 Each Counter in State = 3
 Each Timer in Global Rules = 2
 Each Timer in State = 3
 Other Actions = 1