Target pdu, Iscsi cmd, Any scsi command – Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 107
SierraNet M168 User Manual
105
Trigger and Filter Settings in Easy Mode
Teledyne LeCroy
iSCSI Logout Request
iSCSI NOP‐Out
iSCSI SNACK request
iSCSI Task Mgmt Request
iSCSI Text Request
Target PDU
The dialogs are similar to the Initiator PDU above. The patterns available are:
iSCSI Asynchronous Message
iSCSI Response
iSCSI Data‐In
iSCSI Login Response
iSCSI Logout Response
iSCSI Nop‐In
iSCSI Ready to Transfer
iSCSI Reject
iSCSI Task Mgmt Request
iSCSI Text Request
ISCSI Cmd
Any SCSI Command
Double‐click 6‐Byte Any SCSI Cmd to open the dialog.
Figure 2.70: 6-Byte Any SCSI Cmd Dialog
Enter the values for the Ether header, IP Header and the count of the expected number of
occurrences. Check the Check All box to select ports P1 through P8 or individually select
ports.