Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 27)

SierraNet M168 User Manual 25
Launching Your Analyzer Teledyne LeCroy
Networks...
Click Networks to select an adapter. The following dialog displays.
Figure 1.17: Select Adapter Dialog
Refresh Device List
Click Refresh Device List to refresh the device list.
To connect to a device, select a device which is Ready to Connect and click the Connect
button on the right. The Connection Properties dialog is displayed (see the following
screen capture).
Figure 1.18: Connection Properties Dialog
Specify one of the actions from the following:
 Automatically connect to the device
 Ask if I want to connect to the device
 Take no action