Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 57
Advertising
SierraNet M168 User Manual
55
Analyzer Settings
Teledyne LeCroy
In the
FC 16G Setting Tab y
ou can select the following:
Speed ‐ select 1.0625, 2.125, 4.25. 8.5, 16.0 and Autospeed from the drop‐down
list. Autospeed is the default.
Disable Descrambling ‐ select ports.
Training Signal Pack Mode ‐ Unpacked and Packed.
Figure 2.27: FC 16G Setting Tab - Recording Settings Dialog
Advertising