Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 26)

Teledyne LeCroy Launching Your Analyzer
24 SierraNet M168 User Manual
Add Device...
Click Add Device to add a device with a static IP address.
Figure 1.15: Add Device with Static IP Dialog
Note:
When entering addresses, you must include the leading zeros. Please use 003.010.195.006. as
3.10.195.6 will not work. This is also applicable for Figure 1.20 on page 27 .
Remove Device
Click Remove Device to remove a previously added device.
IP Settings...
Click IP Setting to reset IP settings of a device. The following IP Setting dialog displays.
Figure 1.16: IP Setting Dialog
Update Device
Click Update to update a device (see “Update Device” on page 31 ).