Timers/external – Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 69
Advertising
SierraNet M168 User Manual
67
Trigger and Filter Settings in Easy Mode
Teledyne LeCroy
Timers/External
Timer
You can set a timer independently of any other trigger selection, to cause an
unconditional trigger after a set time.
Double‐click Timer in the Pattern window to open the Add Timer Pattern dialog.
Check a Time Unit, enter the Timer Value, and click OK.
Figure 2.41: Connect Disconnect Pattern Dialog
Note:
The timer resolution is limited to one DWORD. The minimum value is 12‐13 DWORD.
Advertising