Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 55)

SierraNet M168 User Manual 53
Analyzer Settings Teledyne LeCroy
Disabling a port can be used to save recording buffer space. A disabled port can still
trigger the analyzer.
Auto Speed is the default port speed selection. It will automatically detect and display the
line speed. In rare cases (such as debugging speed negotiation), it might be desired to set
the analyzers speed manually. Note, that when the speed is set manually, traffic at
different speeds will not be captured correctly.
2.5.4 R ecording Settings Pane
Use the Recording Settings pane (see Figure 2.25 on page 53 ) to select and set the
number and size of segments and save a new trace file. (See “Buffer Size and Segments”
on page 133 .)
Figure 2.25: Recording Settings Pane
Slider
Click to display the Recording
Settings dialog