Agilent Technologies N2620A - Manual (Page 122)

104 N2620A User’s Guide
3 Voice Testing with the FrameScope Pro
2 Select VoIP on Aux-Port to use the Auxiliary port.
3 Once VoIP on Aux-Port is selected, the option TG on Test-Port is
available. If TG on Test-Port is not selected, pressing OK will
complete the VoIP test setup. If TG on Test-Port is selected, the
Traffic Generator Settings panel is accessible.
4 Enter the amount of background traffic to simulate in the
Traffic Generator Settings panel.
The traffic load associated with each call is determined by
the VoIP settings, which is equivalent to the traffic generated
by the VoIP test call on the Auxiliary Port. A minimum of one
call and maximum of 1000 calls are possible.
Press Next to continue.
5 The Traffic Generator Settings screen has two tabs,
Parameters
and Frame.
The Parameters settings are set automatically by the
FrameScope Pro based on the user-defined background
traffic and parameters of the VoIP test call.