Agilent Technologies N2620A User Manual
Page 192
174
N2620A User’s Guide
7
System Operations
•
If you select IP, you can select Use DHCP to automatically
configure the FrameScope Pro when connected to the
network, or select Manually Configure. If you choose to
manually configure the IP settings, you have to at least type
in a valid IP address and subnet mask.
•
IP Address - This value identifies the FrameScope Pro in
the TCP/IP network
•
Subnet Mask - This value is combined with the IP address
to define the subnet of the FrameScope Pro
•
Default Gateway - This is the default gateway (router) that
the FrameScope Pro will use to communicate with devices
on the other subnets
Press Next when done.
The second Test Port Settings Setup screen allows you to change
the Host Name from the default, type in a Domain Name System
(DNS) Domain, and provide DNS and WINS server addresses.
•
Host Name - This name will be used to identify the
FrameScope Pro in NetBIOS and FrameScope Pro protocols.
The default name is ‘FRSCOPE’ followed by the three last
hexadecimal digits of the MAC Address. It may be changed to
any name as desired.