Agilent Technologies N2620A - Manual (Page 4)

IV N2620A User’s Guide
General Safety Information
The following general safety precautions must be observed during all
phases of operation, service, and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in
this manual violates safety standards of design, manufacture, and
intended use of the instrument.
Agilent Technologies assumes no liability for the customer’s failure to
comply with these requirements.
You must follow these to ensure safe operation and to maintain the
instrument in safe condition.
WA R N I N G
• Do not use the device if it is damaged. Before you use the device,
inspect the casing. Look for cracks or missing plastic. Do not operate
the device around explosive gas, vapor, or dust.
• Always use the device with the cables provided.
• Observe all markings on the device before establishing any
connection.
• Turn off the device and application system power before connecting to
the I/O terminals.
• When servicing the device, use only the specified replacement parts.
• Do not operate the device with the cover removed or loosened.
• Use only the power adapter provided by the manufacturer to avoid any
unexpected hazards.
• The N2620A FrameScope Pro is a Safety Class 1 instrument. The
N2620A is powered by an AC/DC adapter.
• All Light Emitting Diodes (LEDs) used in this product are Class 1 LEDs
as per IEC 60825-1.
• Verify that the N2620A is set to match the available line voltage, and
all the safety precautions are taken.
• Do not operate the N2620A in the presence of flammable gases or
fumes.
• Operating personnel must not remove instrument covers. Component
replacement and internal adjustments must be made only by qualified
service personnel. Instruments that appear damaged or defective
should be made inoperative and secured against unintended
operation until they can be repaired by qualified service personnel.
C A U T I O N
•
If the device is used in a manner not specified by the manufacturer, the
device protection may be impaired.
•
Always use dry cloth to clean the device. Do not use ethyl alcohol or
any other volatile liquid to clean the device.
•
Do not permit any blockage of the ventilation holes of the device.