Agilent Technologies N2620A - Manual (Page 98)

80 N2620A User’s Guide
2 Network Testing with the FrameScope Pro
WireMap Testing
WireMap testing checks for proper continuity and termination
of cables. It is used together with the WireMap Adapter.
The WireMap Adapter is connected to the far end of a link or
channel to display and identify the point-to-point connection of
four twisted pairs.
The test identifies the following faults.
• Short circuit
• Open circuit
• Reversed pairs
• Crossed pairs
• Shield continuity faults
WireMap Adapter
The four LED indicators flash while the test is being
performed and go off when the test is completed.
Channel or Link Channel or Link