Agilent Technologies N2620A - Manual (Page 222)

204 N2620A User’s Guide
8 Network Performance Analyzer Reference
Autotest suite used to test this device would contain a DHCP
server test and a DNS server test for this device. The same
Autotest suite can also contain tests for other devices.
The Default Autotest Suite
The FrameScope Pro powers up with the selected <Default>
suite. When the <Default> suite is selected, the FrameScope Pro
automatically creates an Autotest suite from the servers listed
in the Network Database.
Editing Tests
Each test has parameters that specify the test behavior and
coverage. For instance, there is a well-known port for web
servers to listen on, but a web server may have been configured
to listen at a different port. So, the different port number is
provided as a parameter with the well-known port number as
the default. User names and passwords are also included as
parameters for tests that can provide extra coverage by logging
into a server. The extra coverage may include reading a file or
retrieving an email. Each server has a default test that can be
performed without the user-defined setup information so that a
new test can be configured with minimal effort. After selecting a
specific name or address, press Edit to start up the wizard which
allows the test parameters to be modified. Refer to the
description of each test below for more information.
Deleting Tests
The Delete button operates on the selected test or test heading.
If a test is selected and Delete is pressed, the test is removed
from the Autotest suite. If a heading such as 6 Print Server is
selected, all the print servers listed under the heading will be
removed from the suite.