Agilent Technologies N2620A - Manual (Page 208)

190 N2620A User’s Guide
7 System Operations
Enabling and setting the remote control web server
Press Edit Settings on the Remote Control screen to enable or
disable the web server for remote control. You can choose
whether to use the test port or auxiliary port (if available) for
remote control. Refer to
“Setting Up the Optional Auxiliary
Port” on page 180 if the auxiliary port is to be used.
If the port used for remote control is changed, the FrameScope
Pro will have to be restarted for the change to take effect.
You can choose to enhance the web access security by adding a
User Name
and Password.
You can also change the default port (80). You will need to
specify the port number to access the FrameScope Pro if you
change the Port number. For example, if the FrameScope Pro
address is 209.6.108.253, the URL would be
http://209.6.108.253
. If Port 8080 is used, the URL would
become http://209.6.108.253:8080
Whenever the Remote Control settings are changed, the
FrameScope Pro must restart before the new settings can take
effect.