Agilent Technologies N2620A - Manual (Page 127)

Voice Testing with the FrameScope Pro 3
N2620A User’s Guide 109
Press Add MGC to add a new MGC. This will call the Add New
MGC screen where the details of the new MGC is configured.
Press Edit MGC to edit the details of the MGC on the Edit MGC
screen. The parameters for the Add MGC and Edit MGC are the
same. Press OK when done.
N O T E
The first MGC in the MGC list will be configured as the primary MGC by
default. You can manually set the primary MGC for testing by selecting the
radio button of the desired MGC. If there is no primary MGC for testing,
Start
will be disabled.
The name of the MGC
which will be part of the
MGC ID in Megaco/H.248
signal
The DNS name or IP address
of the MGC
The transport port for
text-encoded operation
The transport port for
binary-encoded operation