Agilent Technologies N2620A - Manual (Page 188)

170 N2620A User’s Guide
7 System Operations
Restore Default Settings
The following procedure describes how the FrameScope Pro
restores the configuration values that were set when the unit
was shipped from the factory.
The Restore Default Settings is performed when you want to
delete all user-configured system settings or before upgrading
the software.
1 Select Restore Default Settings and press Edit to call the Default
Settings Setup screen.
2 Select Format Internal Flash if you want to clear the data in the
internal flash and return to the default settings and profiles
of the FrameScope Pro.
3 Press OK to restore the factory default settings.
4 As this action will erase all current settings, you are asked to
confirm before proceeding. In the subsequent confirmation
windows, press Yes to accept the resets or No to cancel the
resets and return to the System Settings Network screen.