Agilent Technologies N2620A - Manual (Page 258)

240 N2620A User’s Guide
8 Network Performance Analyzer Reference
• Destination MAC - To send a frame to a station on the local
LAN, type in its MAC address. If the destination address is
set to FF-FF-FF-FF-FF-FF, the frame will be received by all
devices on the LAN. To send a frame across a router, the
router MAC address should be used.
• Source IP or IPX - The source network address, if required. If
the Source MAC is set to simulate multiple stations, then the
Source IP increments along with the MAC. For example, if
the FrameScope Pro is set up to generate the Ethernet or IP
frames from multiple simulated stations with the IP Address
set to 209.6.108.202, then the first two frames would be
addressed as follows.
• Destination IP or IPX - Destination network address, if
required.
Frame number MAC address IP address
1 00-0C-65-01-00-01 209.6.108.202
2 00-0C-65-01-00-02 209.6.108.203