Agilent Technologies N2620A - Manual (Page 89)

Network Testing with the FrameScope Pro 2
N2620A User’s Guide 71
Performing UDP or TCP Throughput Tests
This test measures the UDP or TCP throughput in a given
network. A master and a slave FrameScope Pro is needed for
the UDP or TCP throughput test. The discovery of the slave
FrameScope Pro can be automated.
Select the FrameScope Pro that will be acting as the master
FrameScope Pro.
1 Press Tools on the Main Menu screen, select Performance Tests,
and then select TCP/UDP Throughput Test.
2 Select whether to autosearch for the slave FrameScope Pro,
or type in the name or address of the FrameScope Pro
manually.
N O T E
For best results, Active Discovery should be turned off in both
FrameScope Pro units.