Agilent Technologies N2620A - Manual (Page 78)

60 N2620A User’s Guide
2 Network Testing with the FrameScope Pro
8 If a password is preset in the slave FrameScope Pro, press
Slave Password
on the master FrameScope Pro to type in the
password. A Permission Denied warning will appear if
the password set in the slave FrameScope Pro is not typed in
correctly in the master FrameScope Pro.
Specify the frame length or select
full range to collect all frames
Back-To-Back settings screen
For full duplex networks, you can
specify bidirectional testing.
For half duplex networks,
upstream and downstream can
be tested sequentially.
Duration is the time taken (in
seconds) to transmit burst frames.
For better results, adjust the
duration to load the
device-under-test sufficiently.
Select the frame direction to
measure (bidirectional is only
present for loopback)