Allied Telesis AT-S63 - Manual (Page 124)

Chapter 7: Port Statistics Commands
124 Section I: Basic Operations
RESET SWITCH PORT COUNTER
Syntax
reset switch port= port counter
Parameter
port Specifies the port whose statistics counters are
to be returned to zero. You can specify more
than one port at a time. Port numbers are
specified in the following format:
module ID.port number
For instructions, refer to “Port Numbers in
Commands” on page 40.
Description
This command returns a port’s statistics counters to zero.
Example
The following command returns to zero the counters on ports 1.14 to 1.22
and ports 2.1 to 2.5:
reset switch port=1.14-1.22,2.1-2.5 counter