Reset system – Allied Telesis AT-S63 User Manual
Page 78
Advertising
Chapter 5: Basic Stack Commands
78
Section I: Basic Operations
RESET SYSTEM
Syntax
reset system [name] [contact] [location]
Parameters
name
Deletes the switch’s name.
contact
Deletes the switch’s contact.
location
Deletes the switch’s location.
Description
This command delete’s the stack’s name, the name of the network
administrator responsible for managing it, and its location. To set these
parameters, refer to “SET SYSTEM” on page 87. To view the current
settings, refer to “SHOW SYSTEM” on page 98.
Examples
This command deletes all three parameter settings:
reset system
This command deletes just the name:
reset system name
Advertising