Allied Telesis AT-S63 - Manual (Page 176)

Chapter 11: File System Commands
176 Section II: Advanced Operations
SHOW FLASH
Syntax
show flash
Parameter
None
Description
This command displays information about the file system in the master
switch. The information includes the number of files, how much space is
used, and the amount of space available. An example is shown in
Figure 23.
Figure 23. SHOW FLASH Command
Example
show flash
Flash:
---------------------------------------------------------
Files .............. 12288 bytes (5 files)
Free .............. 8211456 bytes
Total .............. 8223744 bytes
---------------------------------------------------------