Show switch port counter – Allied Telesis AT-S63 User Manual
Page 128
Chapter 7: Port Statistics Commands
128
Section I: Basic Operations
SHOW SWITCH PORT COUNTER
Syntax
show switch port[=
port
] counter
Parameter
port
Specifies the port whose statistics you want to
view. You can specify more than one port at a
time. To view all ports, do not specify a port.
Port numbers are entered in the following
format:
module ID.port number
For instructions, refer to “Port Numbers in
Commands” on page 40.
Description
This command displays the operating statistics for a port on the switch.
Examples of the statistics include the number of packets transmitted and
received, and the number of CRC errors. For an example of the display
and definitions of the statistics, refer to “SHOW SWITCH MODULE
COUNTER” on page 125.
Examples
The following command displays the operating statistics for port 4.14:
show switch port=4.14 counter
The following command displays the operating statistics for all ports in the
stack:
show switch port counter