Set prompt – Allied Telesis AT-S63 User Manual
Page 65
Advertising
AT-S63 Stack Command Line Interface User’s Guide
Section I: Basic Operations
65
SET PROMPT
Syntax
set prompt="
prompt
"
Parameter
prompt
Specifies the command line prompt. The prompt can be
from one to 12 alphanumeric characters. Spaces and
special characters are allowed. The prompt must be
enclosed in quotes.
Description
This command changes the command line prompt. Assigning each stack a
different command prompt can make them easier to identify.
Note
If you define the system name but not the system prompt, the first
sixteen characters of the system name are used as the prompt. See
“SET SYSTEM” on page 87.
Example
This command changes the command prompt to “Sales Stack”:
set prompt="Sales Stack"
Equivalent Command
set asyn prompt=”
prompt
”
Advertising