Allied Telesis AT-S63 - Manual (Page 98)

Chapter 5: Basic Stack Commands
98 Section I: Basic Operations
SHOW SYSTEM
Syntax
show system
Parameters
None.
Description
This command displays the following information about the master switch
of a stack:
MAC Address
The MAC address of the master switch.
Model Name
The model name of the master switch.
Serial Number
The serial number of the master switch.
IP Address
The IP address of the local interface.
Subnet Mask
The subnet mask of the local interface.
Default Gateway
For a stack, this field displays the default gateway address. This is the IP
address of a router interface on your network. The management software
uses this address as the next hop to reaching a remote network device
when the stack’s local interface and the remote device are on different
subnets. The default value is 0.0.0.0.
System Up Time
The length of time since the stack was last reset or power cycled.
Bootloader
The version number and build date of the AT-S63 bootloader.
Application
The version number and build date of the AT-S63 Management Software.
System Name
The name of the stack.