Purge stp – Allied Telesis AT-S63 User Manual
Page 235
Advertising
AT-S63 Stack Command Line Interface User’s Guide
Section III: Spanning Tree Protocols
235
PURGE STP
Syntax
purge stp
Parameters
None.
Description
This command returns all STP bridge and port parameters to the default
settings. STP must be disabled in order for you to use this command. To
disable STP, see “DISABLE STP” on page 233.
Example
purge stp
Equivalent Command
set stp default
For information, see “SET STP” on page 236.
Advertising