Allied Telesis AT-S63 User Manual
Page 93
AT-S63 Stack Command Line Interface User’s Guide
Section I: Basic Operations
93
Examples
This command displays all of the non-default parameter settings in the
stack:
show config dynamic
This command displays the non-default parameter settings for port-based
and tagged VLANs:
show config dynamic=vlan
MAC
Static MAC addresses
MACTIMER
MAC address table timeout value
MIRROR
Source ports of port mirror
MIRTO
Destination port of port mirror
PORT
Port configuration
PORTTRUNK
Static port trunks
ROUTE
Static routes
STP
Spanning Tree and Rapid Spanning Protocols
SWITCH
Master Switch console timer, console startup
mode, serial port baud rate, Telnet server
SYSTEM
Administrator name, switch name, and stack
location
VLAN
Port-based and tagged VLANs
Table 2. Module Variable (Continued)
Variable
Description