Delete ip interface – Allied Telesis AT-S63 User Manual
Page 283
Advertising
AT-S63 Stack Command Line Interface User’s Guide
Section V: Internet Protocol Routing
283
DELETE IP INTERFACE
Syntax
delete ip interface=
interface
Parameters
interface
Specifies the name of the interface to be deleted from
the stack. An interface name consists of “VLAN”
followed by the ID (VID) or name of the VLAN and an
interface number, separated by a dash (e.g., vlan4-0).
Description
This command deletes an interface from the stack. To display the name of
the existing interface, refer to “SHOW IP INTERFACE” on page 295.
Examples
This command deletes the VLAN6-2 interface from the stack:
delete ip interface=vlan6-2
This command deletes an interface using the name of the VLAN, in this
case Sales, instead of the VID:
delete ip interface=vlan-Sales-2
Advertising