Allied Telesis AT-S63 - Manual (Page 90)

Chapter 5: Basic Stack Commands
90 Section I: Basic Operations
SET USER PASSWORD
Syntax
set user manager|operator password= password
Parameter
password Specifies the password.
Description
This command sets the manager or operator’s password. The default
manager password is “friend.” The default operator password is
“operator.” The password can be from 0 to 16 alphanumeric characters.
Allied Telesis recommends against using special characters, such as
spaces, asterisks, or exclamation points because some web browsers do
not accept them in passwords. The password is case sensitive.
Example
The following command sets the operator’s password to “newby”:
set user operator password=newby
Equivalent Commands
set password manager
For information, see “SET PASSWORD MANAGER” on page 84
set password operator
For information, see “SET PASSWORD OPERATOR” on page 85