Purge rstp – Allied Telesis AT-S63 User Manual
Page 249
Advertising
AT-S63 Stack Command Line Interface User’s Guide
Section III: Spanning Tree Protocols
249
PURGE RSTP
Syntax
purge rstp
Parameters
None.
Description
This command returns all RSTP bridge and port parameters to the default
settings. RSTP must be disabled before you can use this command. To
disable RSTP, refer to “DISABLE RSTP” on page 247.
Example
The following command resets RSTP:
purge rstp
Equivalent Command
set rstp default
For information, refer to “SET RSTP” on page 250.
Advertising