Set date – Allied Telesis AT-S63 User Manual
Page 83
Advertising
AT-S63 Stack Command Line Interface User’s Guide
Section I: Basic Operations
83
SET DATE
Syntax
set date=
dd-mm-yyyy
Parameter
date
Specifies the date for the stack in day-month-year
format.
Description
This command manually sets the date on the stack. You can use this
command to set the stack’s date if you are not using an SNTP server. The
date and time are maintained even when a switch is powered off because
the unit has an onboard battery.
Example
The following command sets the stack’s date to December 11, 2004:
set date=11-12-2004
Advertising