Allied Telesis AT-S63 - Manual (Page 296)

Chapter 18: Routing Interface Commands
296 Section V: Internet Protocol Routing
ˆ NetMask - The interface’s subnet mask. The subnet mask is assigned
manually to the interface or automatically by a DHCP or BOOTP
server. If the mask is 0.0.0.0, the DHCP or BOOTP server has not
responded.
ˆ RipMet - The interface’s hop count when routing packets with RIP.
Since a stack does not support RIP, this column can be ignored.
Examples
This command displays all the routing interfaces on a stack:
show ip interface
This command displays just the VLAN2-1 interface:
show ip interface=vlan2-1