Allied Telesis AT-S63 User Manual
Page 194
Chapter 10: Networking Stack
194
Section I: Basic Operations
The information in this menu is for viewing purposes only. The Display
Route Table menu contains the following columns of information.
Destination
The IP address of a destination network, subnetwork, or end node.
Mask
A filter used to designate the active part of the destination IP address.
A binary 1 in the mask indicates an active bit in the address while a
binary 0 indicates that the corresponding bit in the address is not.
Next Hop
The IP address of the next intermediary device to reaching the
destination network, subnetwork, or end node.
Interface
The interface on the switch where the next hop is located. The switch
has two interfaces. The interface “loopback” is for internal diagnostics
only. The other interface is “eth0.”
5. Return to the Main Menu.