Allied Telesis AT-S63 - Manual (Page 696)

Chapter 29: MAC Address-based VLANs
696 Section VI: Virtual LANs
Note
Do not specify any tagged or untagged ports. Additionally, leave the
Protected Ports selection at the default setting of No.
9. Type C to select Create VLAN.
10. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
This completes the first phase to creating a new MAC address-based
VLAN. You assigned it a name, gave it a VID, and set the VLAN type.
You are now ready to assign the MAC addresses, as explained in
“Adding and Deleting MAC Addresses” on page 697.